Pivot Buckle Mod Kit
The Phantom Pivot Buckle Mod Kit for Atomic Backlands is here. This is the same pivot strap that you can find on our Phantom Slipper Boots. Adding a buckle to your boots pivot points will give you better heel hold , both while riding and touring. Our Pivot Buckle Mod Kit will give you the ride feel that you want!
Compatible with most Backland models, excluding the Sport or any other version where the pivot hardware is riveted in.
Included with the Kit
2 Extension Straps
2 Pivot Point Webbing Strap Attachment
4 M5x16mm T25 Buttonhead Screws
8 M5 Washers
1 each of M5x16mm Buttonhead and M4x6mm extra screws
TOOLS ARE NOT INCLUDED !
You will need a T25 Driver, a 15mm Socket with a 3/8" Drive and Blue Threadlocker in order to install this kit properly. We STRONGLY recommend getting Powerbuilt Zeon Metric Sockets... You can find them on Amazon HERE , or likely at any auto parts store. The nut on the pivot point is extremely thin and very easy to strip with a standard 15mm socket, hence our recommendation.
Please note that this an aftermarket modification and may void your manufacturers warranty. Phantom accepts absolutely no liability under any circumstances for any warranty claims relating to your boots.
Please read the instructions carefully prior to attempting installation. Phantom accepts no responsibility for installation errors or damage.